Series 20 Line 5

Profiles have a common slot width of 5mm and a symmetrical 20mm shape
The uniform slot-form permits the integration of connecting elements and the fixing of accessories in any position
 
The 3.3mm or 4.3mm core holes for the front face can be tapped M4 or M5 and permits the fixing of connecting elements, cover caps adjustable feet and other accessories. The core holes may be opened up to M5 or M6

Allowable Tensile Forces

These nominal loads include a minimum safety factor of 2

All profile sizes 500 N

Profile Dish

Either side of slot a dishing of 0.1mm is set into the extrusion

Extruded Profile

Alloy Al Mg Si 0,5 F25
DIN 3.3206.72 (6060)
Condition heat treated Artificially Aged

Mechanical Details

Surface

Natural colors, matt (E6), anodises and consolidates
Scratch-proof and corrosion proof
Minimum layer thickness 10 µm. Layer hardness 250 - 350 HV
Other colors are available on request

Tolerences

Outside dimensions +/- 0,2 mm to 0,5 mm
Profile tolerences to DIN 17615, part 3
Profile length 6000 +60/-0 mm